JONH HUAH Machinery Blow Molding Machine



For PE.PP:


For PVC.PC PETG:

MODEL 型號 FTB2-2L FTB2-5L FTB2-5W
MAX.CAPACITY 最大容量 2L 5L 5L
MAX.NECK DIAMETER 最大瓶口尺寸 46mm 46mm 115mm
MAX.BOTTLE DIAMETER 最大瓶身直徑 120mm 165mm 195mm
MAX.BOTTLE HEIGHT 最大瓶高尺寸 320mm 365mm 310mm
CLAMPING FORCE 鎖模力 25ton 49ton 49ton
OPEN-CLOSE STROKE 開關模行程 140mm 200mm 200mm
CAVITY PITCH 模穴中心距 140mm 210mm 210mm
BOTTOM STROKE 底模上下行程 50mm 50mm 50mm
STRETCH STROKE 延伸桿行程 400mm 450mm 450mm
NUMBER OF CAVITIES 模穴數 2 2 2
NUMBER OF OVEN 加熱箱數 3 3 4
HEATER 燈管式樣 QUARTZ HEATER/21PCS QUARTZ HEATER/30PCS QUARTZ HEATER/24PCS
OPERATING PRESSURE 操作壓力 0.9-1.0Mpa 0.9-1.0Mpa 0.9-1.0Mpa
OPERATING AIR CONSUME 操作空氣消耗量 3.000nl/min 3.000nl/min 1.100nl/min
BLOWING PRESURE 吹瓶壓力 4.0Mpa 4.0Mpa 4.0Mpa
BLOWING AIR CONSUME 吹瓶空氣消耗量 3.700nl/min(2L/1600PCS) 6.600nl/min(5L/1440PCS) 6.600nl/min(5L/1400PCS)
COOLING WATER 冷卻水 100L/min/25℃ 100L/min/25℃ 60L/min/25℃
CHILLER WATER 冷凍水 60L/min/10?-15℃ 60L/min/10?-15℃ 100L/min/10?-15℃