JHE Blow Molding Machine

Feature:

• Supply All Electrical type and Mix with Hydraulic type.
• Much lower noise.
• Reduced the cost of maintenance and time.
• High stable quality of production.
• Save more then 72% electric consumption. (to run 24 hours)

Specifications:

• Same as JN Series
• Same as JS Series

Feature:

• Hydraulic type blow molding machine.
• Automatic production design.
• Mold Open/Close/Move by cylinder.
• Gearbox drive extruder system.
• PLC control with Touch Screen for function, time, pressure...etc.
• Diversified parison knifes and multihead choices depend on the requirement.
• Proportional pressure hydraulic system.
• Especially for 2 liter bottle and 5 liter bottle.

JS Series Specifications:

• Single Station 1 Layer
• Single Station 1 Layer
• Double Station 1 Layer
• Single Station View Stripe
• Accumultor Series

Feature:

• Hydraulic type blow molding machine.
• Automatic production design.
• Heavy-Duty clamping structure design.
• Mold Open/Close/Move by precision linear guide and finished bottles come out in line for next process.
• Gearbox drive extruder directly.
• Scraps centralize management.
• PLC control with Touch Screen for time, pressure, flow,...etc.
• Diversified parison knifes and multihead choices depend on the requirement.
• Especially for 2 liter bottle and 5 liter bottle.

JN Series Specifications:

• Single Station 1 Layer
• Double Station 1 Layer
• Single Station 2 Layer
• Double Station 2 Layer
• Single Layer View Stripe

Feature:

• Hydraulic type blow molding machine.
• 4 shaft design for clamping system.
• Big clamping force, Fast mold open/close hydraulic circuit.
• Finished product eject by mechanical deice.
• Gearbox drive extruder.
• Logic hydraulic circuit.
• Double or Single injection cylinder accumulator design.
• With Die exchanger.
• Energy economizer for hydraulic system.
• Servo Parison Control system.

EX Series Specifications:

• EX Specification

FTB Series
(Electrical Drive linear type PET Blow Molding Machine)

Feature:

• Design in Japan, made in Taiwan, and is using Japanese parts for the main components.
• Linear type high speed PET Stretch-Blow Molding Machine，driven by pneumatic and electricity, Clean, Silent, High speed, and Save power!
• In order to insert wide mouth proforms into carriers precisely, star wheel mechanism is introduced.
• The rotary type reheating zone with a small pitch can reheat preforms efficiently and the pitch is widen to 240mm at the blow station to blow 5liter bottles at the maximum.
• A new concept is put into the preform carrier to eliminate blowing load out of the blow mold and machine frame in blow molding. (Patent pending)
• Capable to blow 5 gallon PET bottles at the maximum.

FTB Series Specifications:

• FTB Series Specifications

FMB Series
(Electrical Drive linear type PET Blow Molding Machine)

Feature:

• The footprint is minimized, Save power, High cycle.
• Design in Japan, made in Taiwan, and is using Japanese parts for the main components.
• Linear type PET Stretch-Blow Molding Machine, drives by electric and pneumatic unit without hydrautic system, Clean, Silent, High speed, and Save power!
• The machine is applicable to medical bottle production, because anti-dust and anti-wearing are well considered.
• The 2 cavity blow mold with a 45mm pitch has a light weight ,so it can be held with a hand, and be changed within 1 hour.
• A booster compressor to create high pressure can be built into the machine as option (The exhibited machine has the booster compressor in it.).
• It has been already launched into medical, cosmetic and stationary bottle production.
• PET, PEN, PP, HDPE, COP can be applied to the machine.

FMB Series Specifications:

• FMB Series Specifications